Gazebo Kit in Biloxi, MS

COASTAL SCREENED VINYL GAZEBO KIT

For a coastal project in Biloxi, Mississippi, this custom 12′ x 14′ White Vinyl Rectangle Gazebo Kit was designed with more than appearance in mind. Along with a screened enclosure, cedar ceiling, and integrated electrical features, the project included engineered drawings for wind speeds up to 150 MPH, addressing an important consideration for an outdoor structure located along the Mississippi Gulf Coast.

With a 12′ x 14′ rectangular footprint, the gazebo creates approximately 168 square feet of covered outdoor living space. The longer floor plan offers plenty of flexibility for a dining table, lounge furniture, or an entertaining setup while making furniture placement simpler than it can be within an octagonal structure.

One important difference with this project is what isn’t included: a traditional gazebo floor. The structure was ordered without a floor and with post brackets, allowing it to be installed directly onto the customer’s properly prepared foundation or outdoor surface. This configuration can create a more integrated transition between an existing patio or hardscape and the protected area beneath the gazebo.

The structural framework consists of pressure-treated wood wrapped in white vinyl, combining the strength of wood construction with a clean, low-maintenance exterior. 4×4 structural posts, straight face boards, standard railings, and braces maintain a traditional appearance without adding excessive ornamental detailing.

Inside, a cedar ceiling introduces warmth against the otherwise bright white structure. 2× rafters with 1×6 tongue-and-groove roof decking give the underside of the roof a finished wood surface, creating an inviting contrast between the natural cedar tones overhead and the vinyl framework surrounding the space.

Above the cedar roof decking, 25-year asphalt shingles provide the finished roofing surface. The traditional shingle roof helps the gazebo coordinate with residential architecture while providing dependable overhead protection from sun and rain.

A screen package makes the structure more comfortable for everyday use in Mississippi’s warm climate. The enclosure maintains airflow and visibility while helping keep mosquitoes and other insects out of the gathering area, allowing the gazebo to function more like a protected outdoor room.

The project also incorporates electrical wiring with a receptacle, providing convenient access to power within the gazebo. This creates opportunities for lighting and other electrical accessories once the system is properly connected on-site.

Because of its Biloxi destination, the gazebo was supplied with engineered drawings designed around 150 MPH wind-speed requirements. These project-specific structural considerations distinguish it from a standard backyard gazebo kit and help address the demanding wind conditions that can affect construction along the Gulf Coast.

Prepared as a prefabricated vinyl gazebo kit, the components and installation hardware were delivered to the customer’s location for final assembly. The combination of a floorless design, screening, natural cedar ceiling, electrical features, white vinyl construction, and high-wind engineering creates an outdoor structure specifically tailored to both the customer’s property and its coastal Mississippi setting.

  • Year Completed: 2025
  • City: Biloxi
  • County: Harrison
  • Price Range: $15,000–$18,000
Start Your Custom Build Project
Previous Project Next Project